Fiber optic closure is a passive component which can provide a great protection for fiber splicing point. Aerially assembling, pipeline assembling and buried underground are all available. The Inline type closure is also called Horizontal closure. The input and output are on the both sides. Inline closure is more suitable for backbone application. GreenTel provides various shapes closure of Inline type. All the closures we offered are with a great sealing performance. High quality plastic
GJS-H020 Boltless Fiber Optic Splice Closure
Description
GJS-H020 fiber optic splice closure is able to hold up to 96 splicing points,the fully rugged design enable it to work in the harshest environment,the boltless locking system facilitate the installation in a large scale. It is suitable for aerial,direct buried,pipeline,wall mounted,manhole and handhole installation. 4 cable entrance supports 2 cables entry from left and 2 cables entry from right side.
Features
● Wate-proof design with IP-68 protection level
● Boltless design with no tools needed for open and close
● Impact test:IK10,Pull Force:100N,Full rugged design
● All stainless metal plate and anti-rusting bolts,nuts.
● Maximum splice capacity:96 fibers(4 trays x 24F)
● Suitable for the fusion splice or mechanical splice.
● Mechanical sealing with rubber protection tube.
Specification:
|
Model |
GJS-H020 |
|
Type |
Inline type |
| Number of Inlet/Outlet ports | 4 ports |
| Cable Diameter | 4 ports×23mm |
| Maximum Capacity | Bunchy: 96 fibers;Ribbon: 96 fibers |
| Capacity per Splice Tray | Bunchy: single layer: 12 fibers; dual layers: 24 fibers |
| Quantity of Splice Tray | 4pcs |
| Body Material | Strengthen Polymer Plastic |
| Sealing Material | Thermoplastic rubber |
| Assembling method | Aerial, direct buried, pipelined, wall mounting, manhole |
|
Dimension |
370(L)×178(W)×106(H)mm |
| Net Weight | 2.1KG |
| Temperature | -40℃~65℃ |
Main Components:
| Item | Name | Usage | Quantity |
| 1 | Housing (Bottom) | To protect splices of fiber optic cables | 1pc |
| 2 | Housing (Cover) | To protect splices of fiber optic cables | 1pc |
| 3 | Splice Tray | To fix Fiber Splice Protective Sleeves | Max. 4pcs |
| 4 | Plug | To seal empty ports | 4pcs |
| Item | Name | Usage | Quantity |
| 5 | Fiber Splice Protective Sleeves | To protect fiber splices | Same as capacity |
| 6 | Nylon Tie | To fix buffer tubes with fibers inside | 8pcs |
| 7 | Insulation Tape | To enlarge cable diameter for fixation | 1 roll |
| 8 | Sealing Tape | To enlarge cable diameter for sealing grommet | 1 roll |
| 9 | Hanging Hook | For aerial installation | 2pcs |
| 10 | Grounding Wire | To connect with grounding device | 1pc |
| 11 | Abrasive Cloth | To polish fiber optic cable | 1pc |
| 12 | Labelling Paper | To label fibers | 1 set |
| 13 | M6 Wrench | To screw bolts of housing | 1pc |
| 14 | Hose Clamp | To fix fiber cables | 4pcs |
| 15 | Steady | 4pcs | |
| 16 | Ring | To seal cables at | 8 sets |
Optional Accessories:
| Item | Name | Usage | Quantity |
| 1 | Valve | To perform pressure and sealing testing | 1pc |
| 2 | Grounding Device | To derive metallic components of fiber cable | 1 set |
| 3 | Buffer Tube | To protect fibers and be fixed on splice trays | specified |
| 4 | Desiccant | To desiccate air in FOSC after sealing | 1 bag |
Green Telecom will be participating the upcoming ECOC 2018 exhibition held in Roma,Italy,on September 24 - 26,we warmly welcome all the partners to visit our booth number: 633.Hall 3.
Location: Fiera Roma
Address:
Viale Alexandre Gustave Eiffel 79 (East entrance)
Via Portuense 1645-1647 (North entrance)
00148, Roma
Exhibiting Products: Fiber Access Terminal,Fiber Rosette,Fiber Splice Closure,PLC Splitter,Fiber Patchcord,Fiber Adaptor,Fiber Fast Connector......etc
If we have the stocks of your required fiber optic splice closure product, we can send it out within 1 day, but the freight should be paid by you. the sample is free. if we do not have the stock of your required product, we willdo it for you.
if meet quality problem, we will check whether it's our problem or not, if it's our problem, we will re-produce the goods to catch your requirement."
For small quantity, we advise to deliver by courier, like Fedex, UPS, DHL, ect.
For big quantity, we advise to ship by sea. We can send goods to your Shipping Forwarder(FOB price). Or if you don’t have one, we can quote you CIF price."
yes, welcome.
We are a direct manufacturer, we have our own factory, welcome to visit.
We need to make new moulds for your own size, and this will cause tooling cost but it can be refunded after order qty reach what we required. So normally we would suggest you can use our similar mould size existed."
