News

Hoop Structure of Horizontal Fiber Optic Splice Closure

Date:31-07-2018

The horizontal fiber optic splice closure adopts a hoop fastening box body, and the hoop structure has two screws fixing structure, a single-sided screw fixing structure and a quick holding structure, and the corresponding type of horizontal fiber optic splice closure is selected according to the number of incoming and outgoing optical cables. The outlets are distributed on both sides of the box, and the number of inlet and outlet cables is generally described as several in and out (currently on the market from one to one to six in and six out); and the cap type fiber connector box is distributed in the box due to the inlet and outlet of the cable. On one side, the number of inlet and outlet ports is generally described as several inlet and outlet ports (currently from two to eight inlet and outlet ports on the market); in addition, since the inlet and outlet ports of the fiber optic splice closure can be sealed by plugging or plugging, When selecting, the number of inlet and outlet cables of the product can be greater than the number of inlet and outlet cables used (but not less than, so it is not enough).

According to the diameter of the cable, the corresponding model is selected: Due to the limitation of the size of the fiber optic splice closure, a connector box cannot be adapted to all the cables. Therefore, when selecting the connector box, it is necessary to select the appropriate cable according to the applicable range of the cable of each connector box. Connector box. Horizontal fiber optic splice closure structure features: high mechanical strength, good sealing performance, alloy casing is treated with electrification, corrosion resistance, excellent performance, sealed with sealing ring and silicone, can be repeatedly opened, expanded, repaired, multiplexed and so on. The cable is fixed by the aluminum tube matched with the diameter of the cable to prevent the cable from being damaged. It can be installed in different parts of the tower and installed firmly. The joint box of the rod is fixed by stainless steel belt. It is easy to operate and can be applied to different rod diameters. Can be installed in different locations.