Fiber Optic Splice Closure Can Accept Loose Stranded


Optical fibers are flexible, transparent fibers made of high quality extruded glass (silica) or plastic, slightly thicker than human hair. It acts as a waveguide or "light pipe," transmitting light between the two ends of the fiber. Optical fiber design and applications related to the field of applied science and engineering is called optical fiber. Optical fibers are widely used for optical fiber communication, which allows longer distances and higher bandwidth (data rate) transmission than other forms of communication.

Use optical fibers instead of metal wires because signals propagate less along them and are immune to electromagnetic interference. Fibers are also used for illumination and are bundled into bundles so that they can be used to carry images allowing viewing in a limited space. Specially designed optical fibers are used in a variety of other applications, including sensors and fiber lasers.

Fiber optic splice closure can accept loose stranded, unidirectional or ribbon cable armor or dielectric configurations and can be used in docking or in-line configurations. The LG-55 closure uses a unique cable clamp design to seal the cable, allowing the two half-covers to be removed without interfering with the contents. In addition, AFL's peel and gasket systems are incorporated to ensure tight connections across a wide range of cable diameters, completely sealing and protecting the fibers while eliminating cumbersome tape and gaskets - making installation quick and easy.

Fiber optic splice closure is commonly used with outdoor fiber optic cables; they provide room for outdoor fiber optic cables to be spliced together. The inside of the fiber optic splice case and the fiber tray will protect the splice fiber and the outdoor fiber optic cable splice section. In general, fiber optic splice cases are dome-shaped and horizontal. Vertical fiber optic connectors are usually dome-sized housings, reliable performance, low cost. The SDJM3-JF spherical fiber optic connector box is used for antenna, wall mount applications, straight-through and branch-in connectors for fiber optic cables. Closed with four circular entrances. The product's case is made of ABS. Press the silicone rubber seal housing and base with the dispensed clamp. The entrance is sealed by a threaded plastic device. After sealing can be opened again, without changing the sealing material can be used again.