The pocket type VFL is the easiest way to identify fibers from end to end and locate connector endfaces. Its red laser shines through most yellow-jacketed fibers to help you trouble-shooting on fiber breaks,tight bends, faulty connections, splices and other causes of signal loss. GreenTel offers you the world-smallest VFL to the most demanding environment with reliable operation under intensive use and harsh conditions. It is a perfect complementary tool for OTDR because of its capability of finding
Among those famous visual fault locator manufacturers and suppliers in China, Green Telecom Tech Co.,Ltd can offer you customized vfl, fiber fault finder, red light source, red laser source made in China. Our factory is waiting for your contact.
The pocket type VFL is the easiest way to identify fibers from end to end and locate connector endfaces. Its red laser shines through most yellow-jacketed fibers to help you trouble-shooting on fiber breaks,tight bends, faulty connections, splices and other causes of signal loss.
GreenTel offers you the world-smallest VFL to the most demanding environment with reliable operation under intensive use and harsh conditions. It is a perfect complementary tool for OTDR because of its capability of finding breaks in the dead zone of OTDR.
● Bright red laser at 650nm
● Pulsed and CW operation
● 50 hours of operation(typical)
● Standard AA alkaline batteries
● Rugged and weatherproof design
● 2.5mm universal connector
● One-year warranty and Three-year recommended calibration interval
Visual Fault Locator - OV-15 Parameter
650nm +/- 20nm
Output Power *
Dynamic Distance **
Pulsed(2Hz) and CW
2.5mm Universal Connector
138mm * 59mm * 20mm
-20 to +70℃ ,<90% RH
-10 to +50℃ ,<90% RH
*After 5 minutes warm-up, 20+/- 3 degrees, CW, FC connector
**The distance is tested by G.655, single mode, lab level fiber
***Standard connector is 2.5mm UPP, 1.25mm UPP will be customized and increase the cost
①MV-15 main body*1
②Nylon bag and the Q/C certificate*1
Hot Tags: visual fault locator, VFL, fiber fault finder, red light source, red laser source factory, customized, manufacturers China, suppliers China, made in China, China made
The Fiber Patch Panel is undoubtedly an important part of the cabling system because it provides a simple, tidy and easy-to-manage solution. For example, if you are connecting a network system that contains multiple wall ports, the patch panel can not only terminate the cable components, but also connect to the final destination signal. Regardless of how big or small your business infrastructure is, patch panels are indispensable.
The patch panel is usually connected to the network rack, above or below the network switch. The patch line connects the ports in the patch panel to the ports in the network switch to create a permanent port connection for the switch and does not interrupt the switch during movement, addition, and change (MAC). According to different standards, there are different types of wiring boards.
Because the patch panels use fiber optic cables to create interconnections, network designers can make changes and fixes without causing latency and additional costs associated with custom routing. The network can grow and change on demand, without the need for more labor-intensive alternative channels to achieve end-to-end trouble. With patch panels, you can only purchase the equipment you need now, leaving the future expansion space. By managing different port densities and speeds in a single high-density patch panel, you can save valuable rack space and help reduce the cost of your data center.
The advantage of using a patch panel is to allow manual monitoring, testing, switching, routing and other maintenance for quick processing because the cable configuration and manufacture in front of the cable that is connected to the more permanent cable allows the change to be made quickly and easily when needed.
Fiber patch panels require two ports for a pair of wires. One port is for the sender and the other is on the receiving end. If you use multiple types of fiber patch panels in your network, you need a hybrid adapter. You can then use these adapters to insert individual fibers into other devices.
How can I get the samples?
If we have the stocks of your required Fiber Patch Panel product, we can send it out within 1 day, but the freight should be paid by you. the sample is free. if we do not have the stock of your required product, we willdo it for you.
If we found some quality problem on your goods before shipment, how should we do?
if meet quality problem, we will check whether it's our problem or not, if it's our problem, we will re-produce the goods to catch your requirement."
How the goods are delivered to us?
For small quantity, we advise to deliver by courier, like Fedex, UPS, DHL, ect.
For big quantity, we advise to ship by sea. We can send goods to your Shipping Forwarder(FOB price). Or if you don’t have one, we can quote you CIF price."
Can I check the quality of goods before shipment?
Are you a direct manufacturer or exporter from China?
We are a direct manufacturer, we have our own factory, welcome to visit.
If I need my own sizes?
We need to make new moulds for your own size, and this will cause tooling cost but it can be refunded after order qty reach what we required. So normally we would suggest you can use our similar mould size existed."