News

The Specific Role Of the Optical Termination Box

Date:28-07-2017

Optical termination box referred to as OTB, optical junction box is mainly used for cable-side fixed, cable and pigtail joints and the rest of the fiber asylum and protection. Optical fiber transmission cable terminal communication network series Terminal wiring auxiliary equipment, suitable for indoor fiber optic cable connection and branch connection of the optical fiber connector plays a protective role.

The optical termination box for the FTTH network allows the connection of 1 to 4 users of optical fiber. The fiber termination box is the interface between the user cable and the user patch cord. Fixed to the DIN 35 mm rail, wall or base of the communication board, the terminal box to ensure the protection of the adapter and security support. The optical terminal box allows the fiber to be managed at two separate levels as well as a fixed protective weld or mechanical joint.

The optical termination box for the FTTH network allows the connection of 1 to 4 users of optical fiber. The fiber termination box is the interface between the user cable and the user patch cord. Fixed to the DIN 35 mm rail, wall or base of the communication board, the terminal box to ensure the protection of the adapter and security support. The optical terminal box allows the fiber to be managed at two separate levels as well as a fixed protective weld or mechanical joint.

Rack mount fiber termination box can be rack mounted to the rack mount unit. Including 19-inch and 21-inch installations. Unlike the wall mounting type, the number of front and rear doors, rails and inner box can be fixed depending on capacity. And provides an interface between an external plant cable and a transmission device. Separation, splicing and termination can be done indoors and outdoors in a small area of the fiber distribution box. The fiber junction box is the best solution for network deployment in client applications. It can be assigned cables after the dispenser is installed, and the fiber optic cable can be pulled out by direct or cross-connect. The standard plug-and-play separator is specifically accepted in the box.