Products

Optical Fiber Identifier

Optical Fiber Identifier

The GFI Live Fiber Identifier allows you to detect traffic and measure signals anywhere onsinglemode fibers without having to disconnect them . It also lets you check for signal presence before rerouting or maintenance , perform continuity tests and verify cable labeling. Based on non-destructive macrobending technology,the GFI doesn't disrupt traffic,damage or overstress the fiber,enabling efficient,accurate and reliable data acquisition.

Feedback sales@greentel-tech.com
  • Description
  • Strength
  • Faq
  • Datasheet Download
Among those famous optical fiber identifier manufacturers and suppliers in China, Green Telecom Tech Co.,Ltd can offer you customized ofi, fiber identifier, optical fiber finder made in China. Our factory is waiting for your contact.   Description The GFI Live Fiber Identifier allows you to detect traffic and measure signals anywhere onsinglemode fibers without having to disconnect them . It also lets you check for signal presence before rerouting or maintenance , perform continuity tests and verify cable labeling. Based on non-destructive macrobending technology,the GFI doesn't disrupt traffic,damage or overstress the fiber,enabling efficient,accurate and reliable data acquisition. Features ● Indicate the signal directions in fiber ● Indicate the signal presence or absence(Live ordark fiber) ● Detect tones 270Hz, 1kHz and 2kHz to verify the modulated signal type ● Handhold design ● Build in VFL 1mw or 10mw optional ● Battery low indication ● Powered by 2 units of 1.5V AA batteries ● One-year warranty and Three-year recommended calibration interval Specification

Optical Fiber Identifier - GFI Parameter

Model

GFI-400

GFI-420S

GFI-420L

Wavelength Range

800 to 1700nm (SM)

Recognizable Signal Type*

CW, 2kHz, 1kHz, 270Hz +/-10%

Detector Type

InGaAs 2pcs

Fiber Type

0.9, 0.25, 2.0, 3.0 mm fiber

Sensitivity

+10 ~ -50dBm

Accuracy *

+10dB to -30 dBm (Continuous Wave) /+10dB to -25 dBm (Modulated Signal)

LED Indicator

Signal direction; signal frequency (2kHz/1kHz/270Hz); low battery

Visual Fault Locator

N/A

1mw

10mw

Power Supply

AA * 2

Size(H*W*D)

230mm *45mm * 45mm

Weight

About 200g

Storage Temperature

-20  to  +70℃  ,<90% RH

Operating Temperature

-10  to  +50℃  ,<90% RH

*at 20.3 degrees,indoor,1550nm wavelength,0.9mm fiber, with white coat,270Hz,error < 5% *0.25,2.0,3.0mm fiber,the performance at continuous wave will be lower *1KHz,2KHz,the performance at modulated signal will be lower *at 1310nm wavelength,the performance will be lower   Standard Package ①GFI main body*1 ②Nylon bag and the Q/C certificate*1 ③Operation Manual*1 ④Paper Box Ordering Information GFI-X (1)GFI-400: Standard Live Fiber Identifier (2)GFI-420S: Standard Live Fiber Identifier With 1mw VFL (3)GFI-420L: Standard Live Fiber Identifier With 10mw VFL
Hot Tags: optical fiber identifier, OFI, fiber identifier, optical fiber finder factory, customized, manufacturers China, suppliers China, made in China, China made

The Fiber Patch Panel is undoubtedly an important part of the cabling system because it provides a simple, tidy and easy-to-manage solution. For example, if you are connecting a network system that contains multiple wall ports, the patch panel can not only terminate the cable components, but also connect to the final destination signal. Regardless of how big or small your business infrastructure is, patch panels are indispensable.

The patch panel is usually connected to the network rack, above or below the network switch. The patch line connects the ports in the patch panel to the ports in the network switch to create a permanent port connection for the switch and does not interrupt the switch during movement, addition, and change (MAC). According to different standards, there are different types of wiring boards.

Because the patch panels use fiber optic cables to create interconnections, network designers can make changes and fixes without causing latency and additional costs associated with custom routing. The network can grow and change on demand, without the need for more labor-intensive alternative channels to achieve end-to-end trouble. With patch panels, you can only purchase the equipment you need now, leaving the future expansion space. By managing different port densities and speeds in a single high-density patch panel, you can save valuable rack space and help reduce the cost of your data center.

The advantage of using a patch panel is to allow manual monitoring, testing, switching, routing and other maintenance for quick processing because the cable configuration and manufacture in front of the cable that is connected to the more permanent cable allows the change to be made quickly and easily when needed.

Fiber patch panels require two ports for a pair of wires. One port is for the sender and the other is on the receiving end. If you use multiple types of fiber patch panels in your network, you need a hybrid adapter. You can then use these adapters to insert individual fibers into other devices.

  • How can I get the samples?

    If we have the stocks of your required Fiber Patch Panel product, we can send it out within 1 day, but the freight should be paid by you. the sample is free. if we do not have the stock of your required product, we willdo it for you.

  • If we found some quality problem on your goods before shipment, how should we do?

    if meet quality problem, we will check whether it's our problem or not, if it's our problem, we will re-produce the goods to catch your requirement."

  • How the goods are delivered to us?

    For small quantity, we advise to deliver by courier, like Fedex, UPS, DHL, ect.
    For big quantity, we advise to ship by sea. We can send goods to your Shipping Forwarder(FOB price). Or if you don’t have one, we can quote you CIF price."

  • Can I check the quality of goods before shipment?

    yes, welcome.

  • Are you a direct manufacturer or exporter from China?

    We are a direct manufacturer, we have our own factory, welcome to visit.

  • If I need my own sizes?

    We need to make new moulds for your own size, and this will cause tooling cost but it can be refunded after order qty reach what we required. So normally we would suggest you can use our similar mould size existed."

Feedback

*Required Information

Company :
*Name :
 
GenderMsMr
*Tel :
*E-mail :
fax :
*Country :
address :
 
How would you prefer to be contacted?PhoneFaxEmail
*Description :

Enter between 20 to 3000 characters,English only.

*Captcha :
captcha
 

Products Recommended